Gateway » MX series » MX8741

Gateway » MX series » MX8741 LCD Screen Replacement Guide

How to Remove Replace Install your Gateway MX series MX8741 Laptop LCD Screen

1. Remove the rubber covers from you Gateway MX8741 LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway MX8741 Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway MX8741 LCD hinges with care as they are delicate.

6. Place the Gateway MX8741 LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway MX8741 Inverter from the LCD.

8. You are now ready to replace and install your new Gateway MX8741 LCD Screen.

9. Recconnect back your Gateway MX8741 Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.